How to Use YGDP Tool Watch Simple Step

How to Flash CPB Firmware using YGDP Tool on Android Device Requirements: Android device should have minimum 20 - 30 percent of charge battery to perform the flashing process.

How to use YGDP Tool:

Step 1: Download and Extract file on your Computer / PC.

Step 2: Download and Install Device USB Drivers on your Computer / PC. If already installed skip this step.

Step 3: Install Driver.

Step 4: Open Tool folder.

Step 5: Install Tool.

Step 6: After Install find Desktop Shortcut and Open Application. ( Password 369 ).

Step 7: And click Config.

Step 8: Find Flash File see below.

Step 9: Select Firmware CPB ROM.

Step 10: Wait for Processing.

Step 11: Now connect Device and then Click Start see below.

Step 12: Wait for Processing..see below.

Step 13: Process Done.

Congratulations, Now your Android Device successfully running.

BEWARE :
(#) Use Right ROM Firmware file and scatter. if you mistake your android device will dead and keep mind your device Battery Charge more than 40 - 50 percent.
(#)  Take backup of important data before flashing using YGDP Tool. Because during the flashing process your personal data will be lost permanently. 
(#)  After Flashing your android device go to setting >backup & reset > reset manually.